RRP: £0
Year: 2007

Description: The KiddyBoard is designed to fit prams and pushchairs which have a rear axle or other horizontal bar(see below) that has a diameter of 10-22mm. The KiddyBoard is supplied with a connector that clamps to the axle or horizontal bar. If there is no point of attachment for the connector, it may be that a BuggyBoard is more appropriate for your pram. Alternatively, an Extra Axle can be fitted to your chassis. Depending on the height of attachment of the KiddyBoard connector, the front plate of the KiddyBoard can be adjusted to provide a flat platform to ride on. If the point of attachment is too high or too low, a Level Adjuster will be required (see below). Attachment and release The KiddyBoard has a one-handed quick release and attachment system. Resting position The KiddyBoard has a resting position when not in use. The KiddyBoard is supplied with a hook and strap. The strap attaches to the pram with the hook hanging down such that it fits into the slot in the centre of the KiddyBoard to hold it up out of the way. Level adjusting system The KiddyBoard can be adjusted to provide a flat platform when the point of attachment is between 10 and 17.5cm (4-7 inches) from the ground, or, in conjunction with the Level Adjuster, 7-23cm (2.8-9.2 inches) from the ground. Instructions. Suspension system The KiddyBoard has suspension to provide a smooth and quiet ride. Dimensions and weight The unboxed weight of the KiddyBoard is 1.6Kg (3.5 lbs). Boxed it weighs 1.8Kg (4 lbs), the box dimensions are 31 x 38 x 5-8 cm (12 3/8 x 15 3/16 x 2-2 3/4 inces). Colour: Choice: Original Black, Footsteps Blue, Footsteps Red, Camouflage